CUES is the world’s leading manufacturer of closed circuit television video (CCTV) pipeline inspection systems, joint sealing solutions, pipe profiling equipment, and asset inspection/decision support software. For over 58 years, CUES has provided innovative pipeline inspection technology and solutions to enable accurate condition assessment and proactive maintenance programs for buried infrastructure.
CUES continues to lead the industry by designing and manufacturing products for pipe inspection, profiling, rehabilitation, and data acquisition right here in the USA, with bi-directional interfaces to ESRI ArcGIS and asset management software such as Hansen, Azteca Cityworks, and others. CUES’ GraniteNet Software provides a strong foundation for decision-making to establish priorities for pipeline inspection, rehabilitation, or replacement.
Manhole inspection systems, chemical grouting systems for mainline and lateral pipe joints, lateral-reinstatement cutting systems, and advanced sonar, lidar, and laser profiling systems are also available from the industry’s infrastructure experts at CUES!
CUES is proud to introduce the Currahee Cutters. These cutters are specifically designed to reinstate wastewater service laterals, remove protruding taps, and brush-finish existing cuts. The cutters function in a range of 5.25" through 36" pipe, are equally effective in CIPP or fold and form liners, and can be installed on a CUES K2 truck-mounted cutter system.
CUES also developed a new 1.9hp air motor for the small Currahee Cutter line to provide more power, increased productivity, and a smoother cut when operating in 6” - 12” relined pipe. Kits are available to retro-fit Currahee Cutters for use with Kangaroo air-motors and service kits can be purchased for regular maintenance intervals on existing motors. Contact CUES for a discussion and demonstration.
The SPiDER Scanner is the first wireless and color manhole inspection technology in a lightweight and compact form factor. The SPiDER is a scanner which can calculate its position in the manhole shaft by using its sensor data to measure its incremental motion instead of the payout cable. SPIDER weighs less than 30 pounds and can be hand carried to easements or other previously difficult to access sites. This wireless portability is possible because the processing computer and battery supply are built into the scanner.
The CUES C550c Hunter is mounted in a compact and rugged weatherproof enclosure that can fit into an ATV, van or pickup truck to access easements and hard-to-reach areas. Featuring the C550c controller, the Hunter is designed around the user, helping you to create survey reports more easily and efficiently. With a wide variety of manual and advanced powered drum options, wide choice of wheels and tires, powered and manual elevators and a cradle allow you to inspect pipes from relined 6” all the way up to 60”. Heavy duty welded lifting eyelets and forklift skids are provided for quick deployment to the host vehicle. Contact CUES for a discussion and demonstration!
The flexitrax C550c is designed around simplicity of operation. Ready to use in 30 seconds from powering on, it requires minimal training to operate, letting you concentrate on pipe inspection. A large 12.1”/307mm HD, daylight visible screen combined with full-size keyboard and dedicated function keys guide you through the survey process. Built in is a high capacity internal lithium-ion battery, providing power for up to a full day’s typical usage, and 128Gb of solid state memory.
The flexiprobe C540c system simplifies your operations by automatically creating a survey report, allowing you to concentrate on your inspection tasks. Share your reports quickly and easily via email or the Dropbox file sharing service.* Use GraniteNet software to integrate the CUES flexiprobe C540c to your asset inspection, decision support, and work management program.
CUES has developed a new lateral pan & tilt camera. The NEW CUES Micro Pan & Tilt Camera is designed to work with the LAMP II lateral launcher as an optional pan and tilt push camera. The camera is designed to be steerable to navigate through multiple wyes when traversing 45 or 90 degree bends or sweeps. It can be easily deployed with or against the flow. The camera includes a detachable steering wand, an automatic, powered, self-leveling camera head, built in lens wiper, and (2) banks of LED’s with variable light intensity. Additional features include 360 degree pan and tilt, and built in sonde with switchable frequencies.
• Built in multi-frequency sonde transmitter; 512 Hz or 8 kHz
• Direct the camera and lights to observe all pipeline defects
• Built in camera lens wiper; no need to remove the camera from the pipe to clean the lens
• Detachable steering wand to navigate through multiple wyes
The SolidFX is a Multi Sensor Inspection (MSI) Platform System equipped with the side scanning Digital Universal Camera (DUC), LiDAR and digital Sonar. This system is available on a float, CUES Mudmaster or tracked transporter and can be used in 18 inch or larger diameter pipe sizes.
The SolidFX is offered for rental, which includes training and report generation, for contractors, municipalities and as a service provided by Partners in Pipeline Inc.
Made to withstand the most severe conditions and ergonomically designed for comfort and efficiency, CUES truck-mounted systems can include TV inspection equipment for sewer/storm/potable water lines, mainline joint or lateral sealing, and lateral reinstatement cutters for the relining industry. A truck chassis can be specified to contain all or any combination of the aforementioned equipment!
CUES has developed a new pipeline inspection tool designed to significantly reduce unplanned downtime due to remote equipment failures. The CUES REDI (Remote Evaluation Diagnostic Inspection) Kit is the first pipeline inspection troubleshooting kit available on the market today designed to aid electrical issues, troubleshooting, and repair issues out in the field. The release of this new product reflects CUES continuing commitment to offer the best customer support services in the business.
The CUES REDI Kit features a hi-resolution web camera for two-way video conferencing with CUES to expedite troubleshooting and enhance parts identification, a Diagnostic Test Box for easy access to the TV cable conductors via test points, a built in mini-camera, used to send video back thru the TV cable and truck, and much more. Use the REDI kit, along with CUES technical staff, to take CCTV pipeline inspection troubleshooting and support to the next level. Contact CUES for additional info...
More Information » cuesinc.com/equipment/redi-kit
The CUES Digital Universal Camera (DUC) is a semi-autonomous, high resolution digital CCTV side scanning camera designed for rapid and detailed condition assessment of your wastewater system. When used in conjunction with CUES asset-based Granite XP decision support software, you can inspect and assess 5000 feet or more per day, increasing your revenue, while reducing your expenses. The system can be packaged for off-road applications to minimize the costs of traffic control.
Available in multi or single conductor format, the OZII optical zoom pan-and-tilt camera system offers unparalleled imaging technology and built-in lighting for 6” to 72” pipe to produce clarity of picture with enhanced detail. The OZII camera provides up to 40:1 optical/digital zoom, automatic focus, remote focus and iris control to assure the highest quality picture within varying pipe conditions.
The OZIII optical zoom pan-and-tilt camera system offers built-in directional field replaceable lighting for 6” to 72” pipe to produce the highest quality image to enhance the details of your CCTV inspection. The OZIII camera provides up to 40:1 optical/digital zoom, automatic focus, remote focus and iris control to assure the best quality video within varying pipe conditions. The robust design of the OZIII camera includes protective forks for the camera head to protect it during insertion and retrieval and to shield it from roots and other obstructions in the pipe. Get the finest detailed video inspections with the CUES OZ III (Optical Zoom) Camera!
Multi and Single Conductor II Wheeled Transporter
The Steerable Pipe Ranger II is a rugged and versatile robotic camera transporter designed to traverse silt, mud and debris commonly found in storm and sanitary sewers. The SPR II is designed with single-point wheel removal to facilitate speedy configuration changes for various pipe diameters and conditions.
The unit is designed to operate with all CUES inspection systems with up to 2000’ of single-conductor or multi-conductor cable to inspect 7” relined pipe through 72” diameter pipe. The unique built in two (2) speed transmission doubles the torque of the unit to produce maximum pulling power in large diameter pipe when the 10.5” diameter tires are installed.
The steerable Compact Pipe Ranger (CPR) camera transporter can traverse up to 1200' under normal pipe conditions to inspect 6" relined pipe through 30" diameter pipe and larger. When assembled with the CUES OZIII zoom pan and tilt camera, the compact length enables the unit to negotiate most difficult entry conditions and standard sweeps.
The superior pulling power of the CPR, combined with the optics and directional lighting of the compact OZ III zoom pan and tilt camera (with the ability to rotate in a 4" circle), creates video inspection quality that's unsurpassed in the industry. Multiple wheel sets are available to maximize bottom-clearance, traction, and optimum camera position. Ease of operation is accomplished with one joystick control for all transporter and camera movements. A variable "cruise control" setting is also available for transporter speed for hands-off operation.
Traverse varying pipe conditions with quick install of wheels or tracks
Inspects 6” relined through 24” pipe
Single point removal of wheels
High-traction tracks available, easy to install
Weighted adapters optically center the camera in each pipe size and increase bottom clearance
Various wheel sets available to maximize performance in various pipe conditions
Compact transporter enables traversal of offsets in small diameter pipe and entry into tight spaces
Camera connects directly into transporter with protective carriage assembly
Works with CUES OZ III pan and tilt zoom camera or CUES Nite Lite Pan and Tilt Camera
WTR III base configuration includes wheels; optional tracks are available
Ultra Shorty III offers the most compact track transporter in the industry today!
The Ultra Shorty III can inspect 6” relined to 24” lines with major offsets and protruding laterals. Maximum clearance is provided for 6” and 6” relined pipe. The Ultra Shorty III includes a built-in protective housing and bulkhead connector to accommodate the mounting and direct connection of the CUES OZ III Zoom Pan and Tilt Camera. Weighted adapter blocks are available to optically center the camera, and increase traction and bottom clearance in 8” through 24” lines. For added versatility, the Ultra Shorty III with OZ III can be used with any multi-conductor system.
Ultra Shorty 21 offers a reduced length measuring only 21"!
The Ultra Shorty variable-weight, tracked crawler is designed for inspecting pipelines from 6” - 30” in diameter and is able to inspect 6" clay pipe with major offsets, meandering conditions, and protruding laterals. Dual 18" cleated track drive provides 50% more wall contact area than wheeled crawlers. This greater contact area assures maximum traction under all inspection conditions. Weighted pipe extenders assure maximum traction and debris clearance in lines from 8" to 24" diameter. A lift is available to optically center the camera in 30" to 36" lines. Measuring only 24" long, the Ultra Shorty is easy to insert in small manholes and dead end lines.
The Mudmaster is a camera transporter that’s specifically designed with the necessary weight, power, speed, high clearance, and all wheel drive for pipelines ranging from 24” to 200”.
The Mudmaster combines high ground clearance with pneumatic tires to provide the traction and camera stability that’s required for operation under the most adverse pipeline conditions including high flow, deep mud, sand and large amounts of debris. Optional tandem wheels are available.
The Steerable Mudmaster offers all the same features of the Mudmaster but can turn 360 degrees within its own radius and traverse pipelines with multiple 45 and 90-degree bends. The waterproof remote operated camera lift can be inserted through a 19" diameter manhole with the camera in the lowest position to preclude the operator from confined space entry. This rugged all wheel drive robot can traverse up to 2500 ft. depending on pipe conditions and can operate all CUES cameras, incl...
More Information » www.cuesinc.com/Mudmaster.html
CUES offers the Kangaroo & Giant Kangaroo Lateral Reinstatement Cutters for your relining and spot repair requirements! Both cutters are rugged, water proof, and built to withstand shock and vibration. The Kangaroo Cutters are proven and reliable with hundreds of units in use every day! The Kangaroo Cutters are equally effective in CIPP or Fold and Form liners and can be installed on any CCTV manufacturer’s truck-mounted system. Both cutter systems operate optimally with 1000-1500’ of cable and include the Dual Cutter Controller!
Launches in all laterals with or against the flow in 6" pipe and larger!
Inspect Mainlines and Adjacent Lateral Services with One Inspection Run
Lightweight / Compact Wheeled Unit! Pulls 1000 ft.
Single Point Removal of Wheels
Fits Into a 6” Line
Optional Mini Pan & Tilt Camera
Optional Rear-view CameraBuilt-in Sonde in the lateral camera for locating
Supplied with 4 sets of Wheels for 6”-30” lines
Optional wheel sets are available - steel based for high traction
Optional chutes are available to increase pipe size range
The CUES MPlus+ offers the most flexible and feature packed lateral and mini-mainline push system on the market. The MPlus+ modular design combines easy operation with its refined All-In-One set up with the flexibility of facilitating quick removal of the control unit to be used separately for off road or remote jobsites or to accommodate compact storage. The advanced MPlus+ system stands out by integrating all of the most sought after features into an easy to use and intuitive package. This lightweight system is manufactured for rugged reliability and designed to handle rigorous field use. The MPlus+ is the most versatile push system available in the market today.
The CUES K-2 Base Station is a self-contained CCTV inspection system supplied in a compact, rugged, weatherproof enclosure that can fit into an ATV, van, trailer, or pick-up truck to access easements and hard-to-reach areas. A hand-held portable wireless control operates all CUES zoom / pan and tilt cameras and transporters. A built in heavy- duty reel is supplied with automatic video cable payout to withstand the rigors of side load forces during daily operations. Base Station can be supplied with a maximum of 1500 ft. video cable and is compatible with the new Digital Universal Camera (DUC), a semi-autonomous side-scanning camera system, producing high resolution digital video with flat unfolded views of the pipe that greatly enhance the speed of inspection and condition assessment.
The CUES TruVue Video Transmission System enables the Jet Truck operator to remotely view real time video generated from the CCTV Inspection System, avoiding the potential for unintended collisions between the jet nozzle and the CCTV inspection camera. The CUES TruVue works with all manufacturers' video inspection systems, requiring an available video output and AC power.
Sales / Marketing Manager
CUES
Orlando, Florida
CUES
Orlando, Florida
