Webvent

WEF Buyers Guide

Access the most comprehensive, interactive directory of solutions providers for water professionals. Find your next solution on WEF Buyer's Guide - now owned and operated by WEF!

Mobiltex Data Ltd.

THIS IS MOBILTEX. WE’RE THERE.

Products 

  • GCRTech TRI-T

    The TRI-T range of data loggers use a new data logging architecture that allows the user to monitor pressure input in terms of average values based on typical logging rates plus minimum/ maximum values based on fast sampling rates down to 10 samples/second. TRI-T transient logger can also detect and log pressure surge data up to 1000 readings per second without interfering with the main recordings.

    During threshold logging, the logger checks the pressure signal against the threshold settings 10 times per second and once triggered starts logging data at one of the configured log rate of 10Hz, 20Hz, 100Hz or 1KHz.

    Pressure surges are logged and surge data plus the slow logged data is sent via cellular communication for the GTRI-T model or downloaded manually using the USB to IrDA communications cable for the portable display model TRID-T.

    If external power is connected the logger can sample pressure at 1KHz continuously, detect and record data at 10Hz, 20Hz, 100Hz...
    More Information » www.mobiltex.com/solutions/pressurized-pipeline-ne...

    GCRTech TRI-T
  • GCRTech TRID

    The TRID range of data loggers use a new data logging architecture that allows the user to monitor pressure/flow inputs in a multitude of configurations providing ultimate flexibility to meet specific application requirements.

    The GCRTech TRID stores data in non-volatile memory organized into data files. Each data file is an independent data logger with its own start/stop time, sample rate, and logging rate. More than one data file can record different types of data for the same input channel. Different types of data include Average, Instantaneous, Minimum, Maximum, etc. The memory register size is designed to be ready to accommodate overflows associated with high pulse rates on Flow inputs.

    Pressure measurement accuracy is optimized using multi-point calibration. Logged data can be re-calibrated before, during or after the recording by recalibrating the pressure transducer to the logger.

    Local communications are via a fast non-contact IrDA communications link (...
    More Information » www.mobiltex.com/solutions/pressurized-pipeline-ne...

    GCRTech TRID
  • GCRTech PFL1 [US/CAN]

    The completely updated PFL1 range of data loggers is based on the field-proven design of the PTRI/TRI model and utilize our patented data logging architecture that allows the user to monitor pressure/flow inputs in a multitude of configurations providing ultimate flexibility to meet specific application requirements.

    The GCRTech PFL1 stores data in non-volatile memory organized into data files. Each data file is an independent data logger with its own start/stop time, sample rate, and logging rate. More than one data file can record different types of data for the same input channel.

    Different types of data include Average, Instantaneous, Minimum, Maximum, etc. The memory register size is designed to be ready to accommodate overflows associated with high pulse rates on Flow inputs.

    Pressure measurement accuracy is optimized using multi-point calibration. Logged data can be re-calibrated before, during, or after the recording by recalibrating the pressure transdu...
    More Information » www.mobiltex.com/solutions/pressurized-pipeline-ne...

    GCRTech PFL1 [US/CAN]
  • GCRTech PTRI / TRI

    The PTRI/TRI range of data loggers use a new data logging architecture that allows the user to monitor pressure/flow inputs in a multitude o f configurations providing ultimate flexibility to meet specific application requirements.

    The GCRTech PTRI/TRI stores data in non-volatile memory organized into data files. Each data file is an independent data logger with its own start/stop time, sample rate, and logging rate. More than one data file can record different types of data for the same input channel.

    Different types of data include Average, Instantaneous, Minimum, Maximum, etc. The memory register size is designed to be ready to accommodate overflows associated with high pulse rates on Flow inputs.

    Pressure measurement accuracy is optimized using multi-point calibration. Logged data can be re-calibrated before, during, or after the recording by recalibrating the pressure transducer to the logger.

    Local communications via fast non-contact IrDA communicat...
    More Information » www.mobiltex.com/solutions/pressurized-pipeline-ne...

    GCRTech PTRI / TRI
  • GCRTech GTRI

    The GTRI data logger has up to 8 data files for monitoring a range of analogue and digital signals and benefits from the latest advances in cellular communication.

    These advanced devices utilize a unique data logging architecture that can detect pressure surges and measure minimum night flow more accurately using Pulse Interval Timing [PIT]. The loggers allow users to analyze data in greater detail than currently available with traditional loggers. These powerful features enable additional fast logging, such as step testing, without interfering with the main 15-minute recordings.

    GTRI data loggers store data in non-volatile memory organized into data files. Each data file is an independent data logger with its own logging parameters. More than one data file can record different types of data for the same input channel. Different types of data include Average, Instantaneous, Minimum, Maximum, etc.

    Communications via 4G/5G LTE CAT M1 and NBIoT cellular options del...
    More Information » www.mobiltex.com/solutions/pressurized-pipeline-ne...

    GCRTech GTRI
  • GCRTech GNEP-FM-PPF

    Pressure management and control in water distribution systems is a proven technique for reducing leakage and the frequency of bursts. Normally, a PRV (Pressure Reducing Valve) is set to a fixed outlet pressure to ensure a guaranteed minimum pressure to the critical point in the network during maximum flow conditions.

    Pressure management using PRV controllers enables pressure to be optimized with changing demand. Excess pressure from lower friction losses during low demand periods is reduced, lowering flows from background leakage and reducing pipe stresses & bursts to extend asset life. The GCRTech GNEP-FM-PPF is a Full Modulation electronic controller that enables the pressure into a zone to be controlled between two pre-set values (“low”and “high”) according to the demand (flow rate) or the time of day. This can achieve immediate water savings and enables the PRV to be controlled reliably and safely.

    The data logger stores PRV inlet/outlet...
    More Information » www.mobiltex.com/solutions/pressurized-pipeline-ne...

    GCRTech GNEP-FM-PPF
  • CorTalk RDL1

    The CorTalk RDL1 represents a convergence of two classes of technology that have long been cornerstones of the Cathodic Protection industry – stationary dataloggers and remote monitoring units. In a significant evolutionary step, the RDL1 is the industry’s most powerful and versatile battery powered remote monitoring device with enhanced fast sample datalogging capabilities.

    Combining the best elements of both technology classes, the RDL1 allows operators to gain visibility into the performance and state of their protection systems while capturing high volumes of data directly to the CorView Cloud Platform via CAT-M1 [LTE-M 4G/5G] cellular connections that are granular enough for forensic and diagnostic analysis. A versatile tool, the RDL1 can be used in a wide range of applications; from identifying dynamic AC and DC interference from a light rail transit system, to being used for datalogging Telluric impacts during a survey, to monitoring a Constant Potential Re...
    More Information » www.mobiltex.com/solutions/cathodic-protection-rem...

    CorTalk RDL1
  • CorTalk RDL1+INT1

    The CorTalk RDL1+INT1 represents a convergence of two classes of technology that have long been cornerstones of the Cathodic Protection industry – stationary data loggers and remote monitoring units. In a significant evolutionary step, the RDL1 is the industry’s most powerful and versatile battery-powered remote monitoring device with enhanced fast sample data logging capabilities that has the added benefit of remote GPS sync’d interruption.

    Combining the best elements of both technology classes, the RDL1 allows operators to gain visibility into the performance and state of their protection systems while capturing high volumes of data directly to the CorView Cloud Platform via CAT-M1 [LTE-M 4G/5G] cellular connections that are granular enough for forensic and diagnostic analysis. A versatile tool, the RDL1+INT1 can be used in a wide range of applications; from identifying dynamic AC and DC interference from a light rail transit system, to being used for data...
    More Information » www.mobiltex.com/solutions/cathodic-protection-rem...

    CorTalk RDL1+INT1
  • CorTalk RMU1

    The CorTalk RMU1 collects and transmits CP performance data and GPS location as frequently as every few hours via satellite or cellular network. This provides technicians with a highly detailed, near-real-time view of the CP system and helps identify short-lived events that may impact CP performance.

    Combined with the CorView Cloud Platform, pipeline operators can implement and control a network of RMU1 devices to gain deep insight into the performance of the CP system, generate reports and instantly identify areas of concern.

    RMU1 Generation 4 is also capable of two-way communication and can provide remote, GPS-synchronized interruption with the addition of CorTalk INT1, a compact accessory module.


    More Information » www.mobiltex.com/solutions/cathodic-protection-rem...

    CorTalk RMU1
  • CorTalk RMU1+INT1

    Designed to fit entirely under a standard CP test station, the RMU1+INT1 is truly a “hidden talent” delivering a small, powerful tool for remote monitoring of CP single or double coupons and structure bond applications that also provides permanent interruption functionality.

    EASILY ADD GPS-SYNCHRONIZED INTERRUPTION

    The CorTalk RMU1 collects and transmits CP performance data and GPS location as frequently as every few hours via satellite or cellular network. Multiple analog measurement channels on the RMU1 provide accurate results for all required AC and DC parameters. An easy to replace battery provides up to 10 years of reliable operation and data transmission and helps maximize lightning isolation.

    The INT1 interrupter can be added at any time and is quickly connected to the RMU1 with a single cable. The INT1 automatically pairs with the RMU1 and can remain permanently installed in order to effectively take off-potential readings. Eliminate the nee...
    More Information » www.mobiltex.com/solutions/cathodic-protection-rem...

    CorTalk RMU1+INT1
  • CorTalk RMU1-SUB

    Our new RMU1-SUB delivers a discrete yet powerful tool for remote monitoring of Pipe-to-Soil potential readings, CP single or double coupons and structure bond applications — engineered to perform in the most demanding subgrade applications utilizing B&T standard valve boxes for bullet-proof installations.

    The RMU1-SUB collects and transmits CP performance data and GPS location as frequently as every few hours via satellite or cellular network. This provides technicians with a highly detailed, near-real-time view of the CP system and helps identify short lived events that may impact CP performance.

    When combined with the MOBILTEX CorView web analytics platform, a network of RMU1-SUB devices provides corrosion engineers deep insights into the performance of the CP system, powerful reporting, and instantly identifies areas of concern.

    The RMU1-SUB installation delivers a unique and intelligently designed solution for your most challenging urban and rural...
    More Information » www.mobiltex.com/solutions/cathodic-protection-rem...

    CorTalk RMU1-SUB
  • CorTalk RMU1-LITE

    MOBILTEX introduces the CorTalk RMU1-LITE — a robust and purposefully-engineered device that enables pipeline operators to effectively automate the collection pipe-to-soil potential measurement data from Cathodic Protection (CP) test stations in extreme or difficult-to-access locations. It’s now possible to realize the operational, functional, and safety benefits of large-deployment remote CP data collection.

    HIGH VOLUME DEPLOYMENTS WITHIN OPERATIONAL BUDGETS ARE NOW POSSIBLE

    The CorTalk RMU1-LITE offers user-selectable intervals, greatly enhancing the amount of pipe-to-soil data that is automatically collected as compared to manually obtained annual pipe-to-soil potential readings. Pipeline operators can take advantage of this capability to collect multiple measurements throughout the year, providing a richer data set to understand seasonal variations or short-term operating irregularities that can negatively impact CP system performance. This flexibility...
    More Information » www.mobiltex.com/solutions/cathodic-protection-rem...

    CorTalk RMU1-LITE
  • CorTalk RMU1-ER

    The CorTalk RMU1-ER collects and transmits a measurement of the corrosion rate near the pipe surface through the use of sacrificial electrical resistance (ER) probes as frequently as every few hours via satellite or cellular network. This provides technicians with highly detailed, near real-time measurement data that is useful in determining the underlying cause of corrosion and the ability to measure changes in corrosion conditions including the effectiveness of repairs, temperature cycles or sudden environmental changes.

    The RMU1-ER is designed to be compatible with a wide range of ER probes. The RMU1-ER has the capability to measure ER probes constructed with tubular, wire, cylindrical, flush, spiral and strip geometries.

    In addition to metal loss, the RMU1-ER can also measure the ER probe potential when a reference cell is connected. As the ER probe is typically electrically connected to the protected structure, the structure potential can be measured.

    Combi...
    More Information » www.mobiltex.com/solutions/cathodic-protection-rem...

    CorTalk RMU1-ER
  • CorTalk RMU1+TS1

    Robust, reliable, and cost-effective temperature monitoring of pipeline assets is now available from MOBILTEX, engineered for performance in even the most extreme and remote locations.

    The MOBILTEX TS1 configurations enable field technicians to install remote, battery-powered GPS-enabled temperature sensing capabilities that are compatible with our CorTalk RMU1 platforms. Measurement data is accessible 24/7 within our CorView Platform cloud-based interface to enhance pipeline integrity data collection and help ensure the fitness of the pipeline in locations that have historically been cost-prohibitive to monitor.

    Accurate temperature monitoring on multi-product lines requires wide temperature ranges, depending on the product and the season. The TS1 RTD transmitter connects to any standard Pt100 resistance sensor, is fully configurable, and provides high stability over an extremely wide range making it ideal for any field application.

    The MOBILTEX TS1 enables pip...
    More Information » www.mobiltex.com/solutions/pipeline-integrity-moni...

    CorTalk RMU1+TS1
  • CorTalk RMU3

    Building on the comprehensive monitoring capabilities of the RMU2, the RMU3 adds two-way communication for accurate, remotely controlled configuration and GPS-synchronized interruption of rectifiers. The RMU3 is a high reliability device engineered to control and monitor rectifiers, bonds and test points. The device provides GPS synchronized interruption functionality and is available in cellular or satellite communication configurations.

    The field hardware consists of two primary components: a measurement terminal block (4-channel [compatible with MUX3 to expand to 16 channels] and 44-channel [RMU3-XL] options available) that is mounted inside the rectifier or a NEMA4 enclosure, and the antenna transceiver that is typically externally mounted. The RMU3 operates from a low voltage source such as a Class 2 transformer and has an internal battery backup system for short-term operation during power outages. Engineered for the lowest power consumption possible, the RMU3 is also s...
    More Information » www.mobiltex.com/solutions/cathodic-protection-rem...

    CorTalk RMU3
  • CorTalk RMU2

    Gain deep insight into the performance of your CP system with the continuous remote monitoring capabilities of the CorTalk RMU2. Simple to install and configure, the CorTalk RMU2 is an accessible and robust system engineered for continuous remote monitoring of rectifiers, bonds and test points. The device is available in satellite or cellular communication configurations and can operate autonomously for 10+ years using standard lithium AA batteries that are easily replaced in the field. This battery-powered solution can be used to monitor remote sites such as test points and bonds, in addition to conventional rectifiers, TEG and solar applications. The RMU2 has been designed with integral high-energy surge suppression and provides unprecedented lightning immunity due to no connections to electrical ground.

    The RMU2 monitors and transmits nine channels of information – four high-accuracy, galvanically isolated, AC/DC capable analog inputs are typically used to monitor vo...
    More Information » www.mobiltex.com/solutions/cathodic-protection-rem...

    CorTalk RMU2
  • CorTalk uGI1-S

    In a matter of minutes field technicians can easily and permanently equip a cathodic protection rectifier with the advanced Mobiltex uGI1-S interrupter and upgrade the unit with remote monitoring and control for survey activities.

    This small, high-performance device combines GPS location with two-way satellite communication to provide precise synchronization, timing accuracy and repeatability for rectifier interruption.

    The addition of an optional Mobiltex Smart Relay cost-effectively expands the capabilities of the uGI1-S to include continuous monitoring of AC and/or DC load current, synchronization status, relay temperature and other important data that is logged by the interrupter.


    More Information » www.mobiltex.com/solutions/cathodic-protection-rem...

    CorTalk uGI1-S
  • CorTalk RMU3+TS1

    Robust, reliable, and cost-effective temperature monitoring of pipeline assets is now available from MOBILTEX, engineered for performance in even the most extreme and remote locations.

    MOBILTEX introduces the CorTalk RMU3+TS1 — a complete RTD Sensor/Transmitter Package that allow operators to easily add up to 12 sensors to new or existing RMU3 installations!

    The MOBILTEX TS1 configurations enable field technicians to permanently install remote, GPS-enabled temperature sensing capabilities that are compatible with our CorTalk RMU1 [battery powered] or RMU3 platforms. Measurement data is accessible 24/7 within our CorView Platform cloud-based interface to enhance pipeline integrity data collection and help ensure the fitness of the pipeline in locations that have historically been cost-prohibitive to monitor.

    Accurate temperature monitoring on multi-product lines requires wide temperature ranges, depending on the product and the season. The TS1 RTD transmitt...
    More Information » www.mobiltex.com/solutions/pipeline-integrity-moni...

    CorTalk RMU3+TS1
  • CorTalk uDL2

    Tiny, yet highly capable, the CorTalk uDL2 provides comprehensive data measurement and logging of coupon status in CP systems. The device provides reliable, accurate measurement of AC current density, coupon DC current, a range of potential measurements and more. The device’s rechargeable battery provides up to four months of service and up to 2,000,000 readings on a single charge.

    Periodic field surveys of cathodic protection systems can’t identify frequent, short-term events that can seriously impact pipeline integrity. MOBILTEX data loggers solve this challenge with pocket-sized, highly accurate devices that are designed to be quickly installed inside rectifiers and test stations to measure and record critical performance parameters from the Cathodic Protection system.

    Each device offers a wide range of configurable settings that includes sample rate, current measurement ranges, time, geo-location and more. A tough enclosure, combined with durable compon...
    More Information » www.mobiltex.com/solutions/cathodic-protection-por...

    CorTalk uDL2
  • CorTalk uDL1

    The CorTalk uDL1 is one of the industry’s smallest and toughest devices for collecting AC and DC measurements from cathodic protection systems. Designed to fit under standard CP test caps, this rechargeable device automatically begins operation when connected to a measurement cable and stores up to 2,000,000 readings.

    Periodic field surveys of cathodic protection systems can’t identify frequent, short-term events that can seriously impact pipeline integrity. MOBILTEX data loggers solve this challenge with pocket-sized, highly accurate devices that are designed to be quickly installed inside rectifiers and test stations to measure and record critical performance parameters from the Cathodic Protection system.

    Each device offers a wide range of configurable settings that includes sample rate, current measurement ranges, time, geo-location and more. A tough enclosure, combined with durable components provides reliable operation in the harshest of operating con...
    More Information » www.mobiltex.com/solutions/cathodic-protection-por...

    CorTalk uDL1
  • CorTalk PI-1

    Based on the award-winning concept that originated with Taku Engineering, MOBILTEX has enhanced the field-proven design of the CorTalk PI-1 Pocket Interrupter to deliver an even more robust, reliable and innovative solution for field Cathodic Protection interruption.

    GPS-synchronized CP interrupters have historically been large, bulky devices with heavy external batteries that often required daily charging. Mobilizing to the field with enough interrupters for even small jobs with several galvanic CP systems could require hundreds of pounds of equipment. Often locations are extremely remote and may require plane or helicopter access, which combined with the required timing and equipment creates an expensive, logistical nightmare.

    The MOBILTEX Pocket Interrupter One (PI-1) is a handheld, light weight two-channel GPS time synchronized cathodic protection (CP) current interrupter that makes these challenges a thing of the past. Capable of interrupting two CP current source...
    More Information » www.mobiltex.com/solutions/cathodic-protection-por...

    CorTalk PI-1
  • CorTalk uGI1-B

    Small, powerful and easily installed, the Mobiltex uGI1-B enables field technicians to quickly equip rectifiers with interruption capabilities during periodic surveys of cathodic protection systems.

    These tough, compact devices are designed to provide precise timing, repeatability and control of rectifier interruption and utilize GPS signals to synchronize operation with all uGI1 units. Event data is recorded by the unit and stored until field technicians download it via USB connection.

    The addition of an optional Mobiltex Smart Relay cost-effectively expands the capabilities of the uGI1-B to include continuous logging of load current and interruption faults.


    More Information » www.mobiltex.com/solutions/cathodic-protection-por...

    CorTalk uGI1-B
Web Site: www.mobiltex.com 

Information