PEWE SuperSkreen® SSI
Internally fed screen units are used for the removal of large insoluble material from an aqueous solution. Screens are used on process and waste water streams for particles that need to be removed to protect downstream systems. The screen can also be used for: product recovery; fat removal; high solids loading; sludge thickening; and mixed settle-able solids for both municipal and industrial applications.
The SuperSkreen® SSI series maximize solids removal in an easy to maintain unit. The screen is a barrier by which material larger than the gap or slot size may not pass, allowing the water to continue through.
PEWE SuperSkreen® SSE
Externally fed screen units are used for the removal of large insoluble material from an aqueous solution. Screens are used on process and waste water streams for particles that need to be removed to protect downstream systems. The screen can also be used for: product recovery; fat removal; sludge thickening; and mixed settle-able solids for both municipal and industrial applications.
The SuperSkreen SSE series maximize solids removal in an easy to maintain unit. The screen is a barrier by which material larger than the gap or slot size may not pass, allowing the water to continue through.
PEWE SuperSkreen® SSP
Parabolic screen units, sometimes referred to as “side hill”, are used for the removal of large insoluble material from an aqueous solution. Screens are used on process and waste water streams for particles that need to be removed to protect downstream systems. The screen can also be used for product recovery; large solids separation and mixed settleable solids for both municipal and industrial applications.
The SuperSkreen® SSP series maximize solids removal in an easy to maintain unit. The screen is a barrier by which material larger than the gap or slot size may not pass, allowing the water to continue through.
PEWE SuperSkreen® SSC
The PEWE SuperSkreen® SSC In-Channel Screen consists of an auger spiral assembly with integral brush, transport tube, drainage section, press section and mechanical drive system. The SSC will be supplied with a perforated screen basket, solids discharge and a press zone drainage fitting. The SSC is designed to extract moisture from wet solids. The unit will utilize a screw to transport and compress the solids and allow the filtered liquid to drain.
PEWE Repeatable Accuracy
The PEWE PolyAccu Dose System® is designed for efficient liquid chemical make down for water and wastewater treatment. The key to solution generation is the application of the correct mixing energy and time in the proper amount of water, every time. By getting these three factors right with features such as the Active Blend Blade® flash mixer, the PolyAccu Dose System® assures reliable chemical dosing.
It is through consistent results chemical use is kept to the effective minimum. Built with sturdy stainless steel and polypropylene the system will withstand years of use in harsh working environments. Completing the unit is the PEWE Positive Prime Feed System®. This unique design provides positive liquid feed to the dosing pump while keeping the drawn emulsion mixed and in suspension.
PEWE G²-SEP® Innovation
The unique technology built into each PEWE G²-SEP® Plate Settler maximizes settle-able solids removal while minimizing chemistry usage. The chassis and vessel standard construction is AISI 304SS. With the Tru Counter Flo® plate pack and weir system, the G²-SEP® Plate Settler operates by precise control of an optional PEWE Command Control automated panel. A pipe flocculator is available for chemical efficacy enhancement as well.
PEWE products and systems are designed in-house and produced under tight quality control. PEWE offers products worldwide to the Food, Petrochem, Pharma, Metals, Electronics, other industries and Municipal market.
Impressive Compact System
The unique technologies built into each PEWE DeWater® System belt filter press are designed to maximize solids recovery while minimizing chemistry usage. Selection of the appropriate belt press system depends upon the sludge solids characteristics encountered.
DeWater® Systems come with an array of belt options to meet your specific solids requirements. Each belt filter press has a wide solids loading range and can accommodate future plant process changes, higher throughput or cake dryness requirements. DeWater® Systems are designed in a range of sizes suitable for both small and large process applications. Tell us your requirements and PEWE can recommend a solution to match your specific needs. PEWE products and systems are designed in-house and produced under tight quality control.
PEWE DeWater® TRU Systems
The TRU is designed to extract moisture from wet solids. The unit will utilize a screw to transport and compress the solids and allow the liquid to drain off. The PEWE DeWater® TRU Truck Receiving Unit consists of an auger screw assembly, screen basket, transport tube, drainage section, press section, discharge section, tank housing and mechanical drive system. The TRU will be supplied with a flanged inlet, solids discharge and a drainage fitting.
PEWE DAF Innovative Quality
The Dueler® DAF is available in two vessel configurations; TM model with AISI 304 stainless steel or PE model in polypropylene. Both systems are constructed with welded 304SS/PVC chassis and piping sub-systems. The TM series is an open style DAF with a cone bottom and vortex stilling well for removal of settle-able solids. The PE series is a Tru Counter-Flo® plate pack unit with a self-draining flat bottom.
PEWE products and systems are designed in-house and produced under tight quality control. PEWE offers products worldwide to the Food, Petrochem, Pharma, Metals, Electronics, other industries and Municipal market.
PEWE DAF Innovative Quality
The unique technology built into each PEWE HD²XLRator® DAF system maximizes TSS removal while minimizing chemistry usage and sludge production. The chassis and vessel are constructed of AISI 304SS. With the Tru Counter-Cross Flo® plate pack, ParaLam Weir® system, integrated pipe flocculator and ROGUE MAX RGT® aeration, the HD²XLRator® DAF operates by precise control of the PEWE Command Control automated panel.
PEWE products and systems are designed in-house and produced under tight quality control. PEWE offers products worldwide to the Food, Petrochem, Pharma, Metals, Electronics, other industries and Municipal market.
PEWE DAF Innovative Quality
The unique dissolved air flotation technology built into each Nx²JEM® DAF system maximizes TSS removal while minimizing chemistry usage and sludge production. The chassis and vessel are constructed of AISI 304SS. With the Tru Counter Flo® plate pack, ParaLam Weir® system, integrated pipe flocculator and ROGUE MAX RGT® aeration, the Nx²JEM® DAF operates by precise control of the PEWE Command Control automated panel.
PEWE products and systems are designed in-house and produced under tight quality control. PEWE offers products worldwide to the Food, Petrochem, Pharma, Metals, Electronics, other industries and Municipal market.
PEWE DAF Innovative Quality
The unique dissolved air flotation technology built into each Poly-E²® DAF system maximizes TSS removal while minimizing chemistry usage and sludge production. The chassis and vessel are constructed of AISI 304SS. With the Tru Counter Flo® plate pack, ParaLam Weir® system, integrated pipe flocculator and ROGUE MAX RGT® aeration, the Poly-E²® DAF operates by precise control of the PEWE Command Control automated panel.
PEWE products and systems are designed in-house and produced under tight quality control. PEWE offers products worldwide to the Food, Petrochem, Pharma, Metals, Electronics, other industries and Municipal market.
PEWE DAF Innovative Quality
The unique dissolved air flotation technology built into each T²-MAX® DAF system maximizes TSS removal while minimizing chemistry usage and sludge production. The chassis and vessel are constructed of AISI 304SS. With a traditional open style, ParaLam Weir® system, integrated pipe flocculator and ROGUE MAX RGT® aeration, the T²-MAX® DAF operates by precise control of the PEWE Command Control automated panel.
PEWE products and systems are designed in-house and produced under tight quality control. PEWE offers products worldwide to the Food, Petrochem, Pharma, Metals, Electronics, other industries and Municipal market.
Efficient MBBR Media
The ASO® Bio-Carrier is an efficient media for moving bed biofilm reactor MBBR aerobic or anoxic applications. The plastic surface is especially designed to provide a suitable home for biological colonies of bacteria and protozoa to grow and flourish. The technology provides for a cylindrical self-sloughing flow through carrier. The MBBR method of treatment requires no sludge recycling or backwashing and is a single pass system.
The ASO® Bio-Carrier is made of virgin high density polyethylene material and comes standard with a UV white finish. The outer hub ring has added thickness for superior crush resistance and strength. Interior striations provide additional surface area for the maximum biofilm capacity. And unlike square media, the cylinder shape readily peel from each other and are not prone to stacking.
PEWE Innovative Quality
The PEWE premier line of OWS Oil/Water Separator systems cover the full range of flow and removal possibilities. The unique technology built into each OWS Oil/Water Separator system maximizes free Oil and Grease (OG) removal without the need for chemistry. With the special coalescing media packs and integrated oil capture, the OWS Oil/Water Separator achieves excellent removal results of up to 99% with minimal operator input.
The complete PEWE product line includes screening systems, inclined plate settlers, DAF units, dewatering equipment and accessories. PEWE products and systems are designed in-house and produced under tight quality control. Support services are provided for product life.
PEWE is an innovative leading company in the field of industrial water and wastewater treatment systems.
More Information » www.pewe-usa.com/product-groups/oil-water-separato...
PEWE Innovative Quality
The unique technology built into each PEWE OWS-P® Multi-phase Oil/Water Separator maximizes oil solids removal while minimizing chemistry usage. The chassis and vessel are constructed of AISI 304SS. With the Diamond Perf separation and adjustable Para-Lam Weir® system the OWS-P® Oil/Water Separator operates with complete precision of the optional PEWE Command Control automated panel. A pipe flocculator is available for chemical efficacy enhancement as well.
PEWE products and systems are designed in-house and produced under tight quality control. Support services are provided for product life.
PEWE offers products worldwide to the Food, Petrochem, Pharma, Metals, Electronics, other industries and Municipal market.
PEWE Innovative Quality
The PEWE premier line of OZ Oil/Water Separator® systems cover the full range of flow and removal possibilities. The unique technology built into each PEWE OZ Oil/Water Separator® system maximizes free Oil and Grease (OG) removal without the need for chemistry. With the Tru Counter-Cross Flo® plate pack and the ParaLam Weir® system with integrated effluent risers and optional gas cover, the OZ Oil/Water Separator® achieves excellent results with minimal operator input.
PEWE products and systems are designed in-house and produced under tight quality control. PEWE offers products worldwide to the Food, Petrochem, Pharma, Metals, Electronics, other industries and Municipal market.
PEWE Automation Ease
PEWE Command Control® automated systems ensure safe and efficient process and wastewater operations. We build custom controls and associated motor control centers delivering consistent performance and measurable results. Operators will find the standard color touch-screen and multi-lingual interface easy to navigate while providing a comprehensive system overview. Data will be readily available and timely.
Process Engineered Water Equipment
Vancouver, Washington
