APS offers ApogeeAero® Roller Casing Spacers with a revolutionary anti-corkscrewing feature specifically designed to fit into a smaller annular space while upholding higher load strengths than any other low-profile, high-load casing spacer roller offered on the market.
Anti-corkscrewing rollers are available in 4 sizes, ranging from small to extra-large, with dynamic loads up to 6,000 lbs. and static loads up to 12,500 lbs. per roller.
Flanges, the most common trouble area, need to be sealed properly to prevent leakage and must also be cathodically isolated to prevent stray currents which cause undo corrosion and eventual breakdown of the metal. Advance Products & Systems manufactures and maintains a supply of quality products and materials which help solve most flange sealing problems, therefore preventing subsequent corrosion and saving the integrity of the pipeline.
This high performance synthetic grease is a non-staining, non-toxic multipurpose lubricate which outperforms all petroleum based greases and many synthetic greases. Compared to petroleum-based greases, which contain many impurities, KleerGel’s product is free of contamination and is one reason why it performs better at higher and lower temperatures and under more demanding conditions.
Radolid® Protection Caps are easily installed by pressing the cap onto the bolted joint by hand. The barbed edge snaps on and prevents the caps from accidental removal. Radolid® Caps are reusable and can be reapplied to 2-3 times. To ensure against corrosion from condensation accumulating in the caps, we recommend brushing nuts with Kleergel® Corrosion Inhibitor Grease.
APS offers a faster pipe sealing method than your everyday caulk, grout, or mastic with USA manufactured Innerlynx® Modular Mechanical Seals. Innerlynx® are used in a systematic approach for installers to easily seal the annular space between the carrier pipe and the ID of a wall penetration.
Safety Spray Shields are used to prevent injury to personnel or damage to equipment in the event of a leak or spray-out of acids, caustics, chlorine, and other dangerous liquids at piping connections (such as flanges, valves, or expansion joints) found in chemical, pulp/paper, petrochemical and wastewater treatment plants. These Safety Shields are commonly referred to as flange guards, flange covers, flange diapers, or flange protectors. Our Safety Spray Shields are constructed from PTFE, polypropylene, PVC, polyethylene, and stainless steel.
Indicote® Leak Indication Paint is a golden yellow 100% acrylic paint that instantaneously changes color through contact with liquids or vapors for immediate visual indication of leaks that are often too small to trigger an indication with conventional detection devices.
Indicote® has an operating temperature of 35 °F to 220 °F. Indicote® changes to red when exposed to acids lower than pH 4 and changes to blue when exposed to bases higher than pH8.
IsoJoint® is a true monolithic isolating joint. The most up-to-date, patented joint on the market, IsoJoint® does not depend on the use of isolating sleeves and washers for bolts nor isolating gaskets or O-rings between flanges.
Why?
These isolating gasket kits require a critical, even surface and proper placement of a sealing element to provide regular and variable crushing and must be maintained over the life of the isolator. External pressure causing an uneven load on the flange area can result in loss of isolating properties as well as the transported fluid.
Corrosion can occur between uncoated UBolts and pipes due to metal contact. This corrosion and pitting can eventually develop into pinhole leaks. Metal contact can be completely eliminated by utilizing APS Atlas® Pipe Support Pads and APS UBolt-Cote®. UBolt-Cote® is excellent for use on plastic, FRP, or glass-lined pipe for shock absorption.
Foreman Nite Caps are available in 1 1/2 to 48 inch sizes, and guard against water, mud, rocks, skids, bottles, cans and other accumulation found in both new and old pipelines and keep animals and small children from entering, as well.
Advance Products & Systems manufactures and maintains a supply of quality products and materials which help solve most flange sealing problems, therefore preventing subsequent corrosion and saving the integrity of the pipeline.
Advance Flange Isolation Gasket Kits are manufactured according to ANSI B16.5 specifications up to 24″. Above 24″, please provide the specifications of your flange using our convenient worksheet. Technical assistance is available upon request.
APS offers a proven solution with Casing Spacers to outperform the labor intensive, unreliable use of wooden skids.
Casing Spacers center water and sewer pipes in casings with easy installation, are virtually corrosion proof, and provide insulating protection from a possible electrical shorting between the carrier pipe and casing pipe. No special tools or grease needed, and they are easily bolted on by a single worker.
Infinity® wall sleeves are designed for concrete poured barriers to construct a circular penetration through walls,
floors and ceilings. Infinity® HDPE wall sleeves are lightweight for an easy one-man installation. The Infinity® wall sleeve is available in 16 sizes ranging from 2”– 25” in diameter and can accommodate wall thickness up to 16”. Infinity® wall sleeves, combined with our Innerlynx® modular mechanical seals, can withstand up to 40 psig or 92 feet of head pressure. All Infinity® wall sleeves come with two locator caps used to position and attach them to the cement form. The best way to guarantee a perfect seal is to use Infinity® wall sleeves in conjunction with Innerlynx® modular mechanical seals. They’re engineeredand sized to provide a stable hole that matches dimensionally with Innerlynx® modular mechanical seals. This makes ordering quick and easy and guarantees a perfect fit every time.
APS steel wall sleeves are manufactured to order and can accommodate any wall thickness. APS Infinity wall sleeve standard length is 16 inches; however, it can be cut to length in the field or in the factory if specified at time of order, keeping in mind a minimum length of 6 inches.
