K-S PADDLE DRYER FOR SLUDGE AND BY-PRODUCTS DRYING
-
The K-S Paddle Dryer is used worldwide for drying a variety of sludges and by-products, generating dry stable products reducing disposal cost and converting waste into marketable by-products. Drying also allows some wastes to be used as fuel.
K-S PADDLE DRYER / PROCESSOR
-
The Komline-Sanderson Paddle Dryer / Processor are highly efficient, mechanically agitated, indirect heat transfer devices that add or remove heat from a process mass. They are used for drying, heating, cooling, pasteurization, crystallizing, and reacting of pastes, cakes, powders, and granules.
ROTARY DRUM VACUUM FILTERS
-
Komline-Sanderson continuous rotary drum vacuum filters offer great flexibility in meeting the needs of producers of many products requiring the separation of liquids from solids. Our experience ranges from simple separations to complex multi-stage applications involving filtration, clarification, e...
HORIZONTAL VACUUM FILTERS
-
The K-S CIX Horizontal Vacuum Filter is a top fed filter that can perform filtration, extraction, and drying in one machine. Slurry is fed continuously and forms a filter cake, which can then be washed as it is progressively indexed through discrete zones. Ideal for applications requiring counter cu...
KOMLINE-SANDERSON ROTARY ATOMIZER
-
Komline-Sanderson's rotary atomizers are used in:
Coal fired power plants - flue gas desulfurization systems
Municipal waste combusters - (municipal waste to energy incinerators), semi dry scrubbers
Mineral smelting off-gas - treatment plants
Coke Ovens - off-gas treatment facilities
Spray drying -...
KOMLINE-SANDERSON PLUNGER PUMP
-
K-S Plunger Pumps are engineered for heavy duty service in difficult sludge, slurry, float transfer, or metering applications. It is a self-priming positive displacement pump that can pass solid objects up to 1-5/8" in diameter, rags, or entrained air. Our pumps have capacities to 34 liters per seco...
GRAVABELT® GRAVITY BELT THICKENER
-
Gravabelt Gravity Belt Thickeners reduce sludge volume of biosolids and waste activated sludge and produce a pumpable concentrate for dewatering, treatment, or transport. The K-S Gravabelt uses only gravity and a porous drainage belt along with our Roto-Kone High Rate Drainage system to enhance thic...
KOMLINE-SANDERSON KOMPRESS® SERIES III BELT FILTER PRESS
-
The Komline-Sanderson Kompress Belt Filter is a broadly applicable product for dewatering municipal Biosolids and industrial sludges.
K-S BIOSOLIDS DRYER SYSTEM FOR BIOSOLIDS AND BIOLOGICAL SLUDGE DRYING
-
The Komline-Sanderson Biosolids Drying System uses indirect drying technology to convert municipal and industrial biological sludge into a sterile, free flowing granular product. The dried biosolids can be beneficially reused as a slow release nitrogen fertilizer, soil amendment additive or as a gre...
DISSOLVED AIR FLOTATION
-
Komline-Sanderson Dissolved Air Flotation Clarifier is suited for wastewater streams containing solids, oils, and greases, which are difficult to settle or have a tendency to float. With proper chemical conditioning we remove colloidal and emulsified materials. Complete pretreatment systems can be s...
Mobile test facility "Lindsey"
-
Our mobile test facility "Lindsey" is available to our customers in the US all year round.
In a 1-2 week trial on site with one of our mobile plants, we ensure that our customers find the optimal solution for their process and thus safeguard the customer.
Whether it is a trial of sludge dewatering u...
Hiller Decanter Centrifuges for ATEX
-
HILLER decanters and equipment are used in many situations where protection from explosion is also necessary. For
instance in many areas of industrial production where raw materials and environmental technology is used, and where
products being processed may create a situation when an explosive atmo...
Hiller TricaPress
-
SEPARATION OF 3 PHASES
In addition to the known effect of separation of solids by sedimentation in 2 phase decanters the HILLER Tricapress Decanters make use of the density differences of both liquids to separate them from each other in only one process step. Here two liquid phases with different de...
Hiller Remote Monitoring
-
Operators of decanter centrifuges, regardless of whether they are manufacturing companies, operators or the processing industry, have to react ever more quickly to changing external requirements. Malfunctions that lead to machine downtime cause trouble and costs. With HILLER‘s flexible remote...
Hiller Centrate Control
-
CENTRATE MONITORING WITH OBJECT SENSOR
Process:
To check the centrate quality for a consistently high degree of separation, HILLER GmbH offers a new and patented process for monitoring the centrate: the HILLER Centrate Control. This means we offer our customers optimum procedural reliability.
BENEFI...
Hiller ECO-JET weir plates
-
HILLER has developed a system that helps you to save up to 30% of the energy consumption of your decanter.
With the HILLER ECO-Jet Weir Plates you save cash, plain and simple - within just a short time this investment will have paid
for itself. Installing these weir plates does not result in any los...
Hiller SEE-Control pro
-
The development of the SEE-Control pro enables the best process results as well as optimum energy consumption of the HILLER decanter.
The SEE-Control pro also focuses on fast and reliable monitoring of the electrical instruments. The touch-based user interface is intuitive to operate and, thanks to...
Hiller lysing device
-
Basic procedural approach:
Waste activated sludge (WAS) is generally mechanically thickened prior to mixing with the primary sludge, in order to achieve an optimal consistency in the raw/mixed sludge subsequently before digestion. The amount of sludge added to the digestion tank is therefore reduced...
Hiller DecaThick
-
General process concept
To achieve an ideal consistency in the raw or mixed sludge prior to the digestion, as a general rule the excess slduge is mechanically thickened before mixing with the primary sludge. The excess sludge thickening reduces the amount of sludge
fed to the digestion tank. This yi...
Hiller DecaPac
-
The latest HILLER compact unit, the DecaPac, can be put to work on your separation task straight away. The key advantages include rapid availability, simple plug and play integration into ongoing operations, as well as the very attractive price point and low operational costs.
ADVANTAGES:
no plann...
Hiller DecaPress
-
Hiller Deca Press for sludge dewatering
HILLER DecaPress proves its outstanding performance in a practical way through its simple operation, stability, and the best quality of solid-liquid separation. The HILLER DecaPress is therefore an example of the highest technical capability and operational st...
Aero-Mod, Inc . . . wastewater process solutions
-
Aero-Mod, Inc. specializes in custom-designed wastewater treatment facilities. We offer products and engineered solutions for biological treatment of municipal and industrial wastewater using clarification, nutrient removal, aeration, filtration and solids dewatering. Equipment, process patents, and...
iSBR (Sequencing Batch Reactor)
-
As a result of the exceptional suitability of the HYPERCLASSIC®- Mixing and Aeration System for Sequencing Batch Reactor plants, we have more than 15 years of experience and considerable knowhow in this fjeld. For this reason, we offer SBR plants as an INVENT system solution. In this case, we al...
Floating HYPERCLASSIC-Mixer/Aerator
-
For the important task of mixing and aeration in aerated lagoon treatment plants the engineer or
operator had only two options until today: He could either use surface aerators or floating membrane
aerators. While the surface aerators usually do not provide economical oxygen transfer performance and...
iDISC Membrane Aeration System
-
The INVENT iDISC® has been developed and optimized for the use in municipal and industrial wastewater treatment plants. It efficiently supplies the mixed liquor in the activated sludge tank with oxygen and is suitable for almost all variations of the activated sludge process.
iDISC®- Diffuse...
Floating EFLEX Membrane Aeration System
-
E-FLEX®- FLOAT is the floating version of our proven E-FLEX®- Aeration System. It is mainly used for aerated wastewater ponds or lagoon tanks with plastic liner, earthen basins with natural sealing, natural ponds and lakes and all aerated tanks, in which the levelling of conventional bottom...
HYPERCLASSIC-Flocculation System
-
The HYPERCLASSIC®– Flocculation System is based on the patented hyperboloid mixer, which outshines as a result of its minimum shear forces combined with excellent mixing and sedimentation-free properties.
Given its relatively long yet gentle acceleration path along the agitator body, shear...
HYPERDIVE Mixer
-
The INVENT HYPERDIVE® - Mixer is a vertical mixer with a hyperboloid-shaped mixer body, installed close to the bottom, and a submersible drive. Contrary to other products, it was developed and designed especially for applications in the area of water and wastewater Treatment.
CYBERPITCH Flash Mixer
-
The INVENT CYBERPITCH®- Mixer is particularly used for mixing applications where a high local energy intake is required. In the field of drinking water preparation it is used to thoroughly mix in flocculants and precipitant ideally followed by the well-known INVENT Hyperboloid mixers in the cons...
CYBERSLUDGE Mixer
-
One of the key-parameters for the overall energy efficiency of a biological wastewater treatment plant is the ability to produce a high amount of methane gas in the waste sludge digesters. The more gas can be delivered to the biogas motors, the more energy can be produced to run the various machiner...
HYPERMIX Agitator
-
Stratification in drinking water reservoirs represents a big risk. During the stratification process, different water layers with different temperatures occur. There is no fluid exchange between these layers which leads to longer dwell times for a part of the water and thus to algal formation, subse...
iBC-MIX - Tote Tank Mixing
-
IBCs (Intermediate Bulk Container), tote, or pallet tanks are often used for the transport and storage of bulk liquids, such as chemi¬cals, flocculants, coagulants, food and beverage ingredients, paint and coatings pre-products or final products, or other commodities. Many of these products or p...
CYBERFLOW Accelerator
-
The INVENT CYBERFLOW®- Accelerator has been specially developed and optimised for the energy-efficient the generation of a horizontal flow in the recirculation basin for biological wastewater treatment. The overall fluid mechanics concept used here is revolutionary in comparison to conventional...
HYPERCLASSIC Mixer/Aerator
-
The INVENT HYPERCLASSIC®- Mixing and Aeration System was developed and optimized especially for demanding applications in municipal and industrial wastewater treatment plants. It provides efficient oxygen transfer and optimal mixing during the biological stage.
In addition to the task of introdu...
HYPERDIVE Mixer/Aerator
-
The INVENT HYPERDIVE®- Mixing and Aeration System was developed and optimized especially for demanding applications in municipal and industrial wastewater treatment plants. It provides efficient oxygen transfer and optimal mixing during the biological stage.
In addition to the task of introducin...
EFLEX Membrane Aeration System
-
INVENT E-FLEX® is the ideal aerator for municipal and industrial treatment plants. It efficiently supplies the mixed liquor in the activated sludge tank with oxygen and is suitable for almost all variations of the activated sludge process.
E-FLEX®- Diffusers are used as modular components in...
iTURBO Compressor
-
INVENT has a long tradition of providing energy efficient products, systems and solutions for wastewater treatment plants around the world. The iTURBO® – Compressor is specially suited for supplying air to aeration systems in activated sludge plants. The iTURBO® – Compressor is a...
iDEC SBR Decanting System
-
The development of the iDEC®-SBR Decanting System was based on the well known features a decanting system which collects and discharges purified wastewater out of Sequencing Batch Reactors is expected to show. Before the INVENT-decanters were created, different types of effluent discharge constr...
DYNAMIX-Disk Filter
-
High-tech for tertiary wastewater treatment
The reuse of water directly after it has been treated in a wastewater treatment plant is increasingly gaining in importance. A fundamental part of tertiary wastewater treatment is the added filtration. It is the basis for further steps of conditioning tow...
iCBA Coarse Bubble Aeration System
-
The INVENT Coarse Bubble Aeration system (iCBA®) has been developed and optimised for special applications in industrial and municipal wastewater treatment plants. It provides oxygen supply and optimal mixing during the biological phase, in particular for use in processes that use carrier...
ALPHAMETER
-
The INVENT ALPHAMETER® combines control and monitoring liquid phase and gas phase to produce real time measurement of key parameters for process and aeration control including:
• Aeration System Oxygen Transfer Efficiency (αOTE)
• Process Oxygen Uptake Rate (OUR)
• Mixed Liq...
TEXFLEX Membrane Aeration System
-
The TEX-FLEX®- Aeration System has been specially developed and optimized for demanding applications in industrial and municipal wastewater treatment plants. For industrial applications in particular, the use of conventional membrane diffusrers is restricted or even impossible, or else they must...
iLagoon
-
There is a further INVENT standard solution for so-called pool purification plants. For that kind of wastewater treatment plant, we supply floating aeration systems, floating mixers, and a specially developed clarifier cleaning system. In this field too, INVENT has extensive know-how and many years...
HYPERCLASSIC Mixer evolution7
-
INVENT made a significant contribution to the efficiency and cost-effectiveness of such plants by introducing the hyperboloid mixing technology to the market for water and wastewater treatment over 20 years ago.
Since then, the hyperboloid mixing technology has been continuously developed and improv...
Blowers (Centrifugal, Radial) & Packaged Blowers
-
Kooltronic Centrifugal Blowers and Packaged Blowers are a durable and economical choice to cool electrical enclosures using a steady flow of ambient air against differing static pressures. We offer a variety of sizes and airflow capacities (CFM), with options that are specifically engineered to meet...
Custom-Designed Cooling & Airflow Solutions
-
Kooltronic is uniquely qualified to manage all phases of enclosure cooling system development and manufacturing -- from fans and blowers to closed-loop, compressor-based refrigeration systems. The experienced Engineering and Sales teams at Kooltronic can support your specifications from concept...
Heat Exchangers
-
The Kooltronic line of Heat Exchangers utilizes various heat transfer technologies, making it one of the most versatile product offerings available. By combining powerful forced-convection cooling with the advantages of a closed-loop airflow system, Kooltronic Heat Exchangers satisfy a wide range of...
Filter Fans & Fan Trays
-
The Kooltronic line of enclosure cooling fans offer the widest selection of airflow capacities, NEMA types, and mounting configurations in the industry. Using available ambient cool air, these fans provide an economical way to efficiently meet your cooling and air moving needs. Enclosure fans and fa...
Enclosure Air Conditioners
-
Kooltronic closed-loop enclosure air conditioners provide greater operating efficiency, lower power consumption and longer life for heat sensitive electrical components. The enclosure cooling unit helps to cool, dehumidify, and recirculate clean air within the electrical cabinet and through the heat...
