Learn More:
Learn More:
Learn More:
Learn More:
Digester + Storage Tanks | Distributor for LIPP America Tank Systems
-
Storage for all Major Markets in the Waste + Wastewater Arena
LIPP America Tank Systems can resist the highly abrasive nature of many industry liquids that require special interior lining systems. This unique assembly process and cost effective steel manufacturing allows the LIPP storage tank system...
Adaptive Clarifier Inlet | Distributor for Passavant hydrograv adapt
-
Passavant hydrograv adapt System provides an adaptive inlet flow guiding plates that are adjustable to different submerging depths controlled by a drive station based on the current hydraulic conditions and properties of activated sludge. A proprietary algorithm is built into drive station that sim...
Low-Temperature Belt Dryer DLT Series
-
The Centrisys DLT Series is a dual belt, low-temperature sludge dryer.
Reuse of waste heat reduces plant operating costs and carbon emissions
Increase safety with low-temperature and minimal dust within the dryer
Dried sludge in a granular form with a dryness level of 70-90+%, depending on process...
Dewatering Decanter Centrifuges CS Series
-
The Right Solution, The Fastest Payback
In 1987, Centrisys designed and built its first centrifuge around what was learned in the field by servicing competitor’s equipment in both municipal and industrial applications. Thirty years later, the Centrisys engineering team continues to benefit fro...
Screw Press SP Series
-
Maintenance is a Breeze
With four divided screens, the Centrisys SP20 is simple to operate, maintain and clean. The four screen baskets and horizontal design allow for most maintenance to be completed without removing the screw shaft. There is no need to pull the auger out; simply open the maintenan...
CalPrex
-
Pre-Digestion P-Recovery
THE PROBLEM: Phosphorus Solubilization Limits Recovery Efficiency
THE SOLUTION: Pre-Fermentation: the Biological Solution for P Solubilization
THE BENEFITS: High Efficiency P-Recovery and Digester Protection
Over 60% Solubilization of P in Bio-P Sludge
Divert Over 50%...
AirPrex
-
Post-Digestion P-Recovery
THE PROBLEM: Struvite Mineral Buildup Leads to Reduced Plant Capacity
THE SOLUTION: AirPrex Optimizes the Sludge Treatment Process Like No Other System
THE BENEFITS: AirPrex Removes Struvite while Significantly Improving Treatment Efficiency
Reduce Polymer Consumption up t...
CalPrex + AirPrex
-
Capture the Most Phosphorus
THE PROBLEM: Phosphorus is a Limited Resource
THE SOLUTION: Maximum Phosphorus Recovery, Minimum Sludge Production
THE BENEFITS: CalPrex + AirPrex: A Combined Approach
Reduce Phosphate Recycle Load up to 90%
Reduce Polymer Consumption up to 30%
Reduce Disposal Costs up t...
Sludge Thickener THK Series
-
The Most Efficient Solution to Thicken Sludge
The Centrisys Sludge Thickener (THK Series) is specifically engineered to achieve high-performance thickening of biosolids. The non-conical design results in greater G-volume, allowing for the highest capacity of flow to the centrifuge. The THK improves...
PONDUS Thermo-Chemical Hydrolosys Process (TCHP)
-
SIMPLE | AFFORDABLE | SAFE
PONDUS, an alkaline process, utilizes low grade heat (160 °F to 180 °F) and sodium hydroxide for sludge hydrolysis. A typical PONDUS system consists of a hydrolysis reactor, hot water heat exchanger, chemical dosing station, pumps, instrumen...
Screw Conveyors
-
Tube Conveyors:
Up to 6" OD
Horizontal or Incline
Flexible Conveyors:
Up to 4" OD
Trough Conveyors:
Up to 10" OD
Horizontal or Incline
Micro Conveyors:
Up to 1" OD
Manual Bag Systems
-
Key Features:
Manual Product Loading
Accurate Dispensing of Dry Product
Mix tank or Wetting Cone Configuration
Small Footprint
Integrated Control Options
Silo Systems
-
The IPM Systems Silo System is used to store, feed, dissolve, and deliver chemical to the desired process point. They are used in many applications for municipal and industrial waste and water treatment applications.
Why IPM System's Silos are Different:
Design of our Silo
Spliced into two Section...
ProBatch Mini (Dry Polymer Activation)
-
Key Features:
Single Skid Design
Accurate Dispensing of Dry Polymer
Superior Polymer Activation
Integrated Controls
Technical Information:
0.125%-1% Solution Concentration
Feed Rate: 0.02-12 Cubic Feet per Hour
Volumetric Screw Feeders
-
Key Features:
Accurate Feed Rates Reduce Operating Cost
Direct Drive Assembly Decreases Wear Items
Stock Motor & Gearbox Reduces Lead Time
Easy Tooling Change-Out Minimizes Down Time
Overwind Conditioner to reduce common feed issues
Liquid Chemical Feed Skids
-
IPM Systems has been providing liquid chemical feed systems to the municipal and industrial markets since 2001. Our uniquely packaged systems can accommodate any preferred selection of pumps. This includes the design and manufacturing of bulk storage tanks, truck unloading stations, day tanks, trans...
Lime Detention Slaker
-
Key Features:
Volumetric Feeder – Accurate addition of Quick Lime
Capacities: 300-24,000 lbs per hour
Replaceable wear liner
Double wall insulation for maximum heat efficiency
Temperature Alarm
Cooling Sequence
Grit removal trough
Dust and Vapor Remover
ProBatch Max (Dry Polymer Activation System)
-
Key Features:
Accurate Dispensing of Dry Polymer
Superior Polymer Activation
Custom Designs and Configurations
Integrated Controls
Feed and Wetting Skid:
Bulk Bag or Manual Unloading
Volumetric Feeder
Wetting Bowl
Eductor/Jet Pump
PLC Controls
Mix/Age Tank Configurations:
Stacked Tanks
Side by...
Liquid Polymer System - ParaDyne P
-
Key Features:
Up to 200 GPM System
No-Clog Neat Polymer Check Valve
Non-Damaging Rotor
No Recirculation of Solution
Mechanical Seal Flush
Loss of Water Protection
Pump and Control Options
Liquid Polymer System - ParaDyne PD
-
Key Features:
Small Flow Applications
No-Clog Neat Polymer Check Valve
Non-Damaging Rotor
No Recirculation of Solution
Mechanical Seal Flush
Loss of Water Protection
Pump and Control Options
Eliminator (Liquid Polymer Activation)
-
IPM's NEW Polymer Activation Technology, can help you reduce...
Polymer Usage by Greater than 20% on Belt Press Applications
Power Cost Du to Non-Mechanical Activation
Hauling Cost with Drier Cake Solids
Maintenance Cost Due to No Moving Parts
Key Features:
Inital Wetting with High Energy A...
Bulk Bag Systems
-
The IPM Systems Bulk Bag System is used to store, feed, dissolve, and deliver chemical to the desired process point. They are used in many medium size applications for municipal and industrial waste and water treatment applications.
Typical applications include:
Neutralization and PH control
Heavy...
Containerized Systems
-
Our containerized systems provide an excellent structure to house the majority of our systems to allow for remote or mobile applications. Our units are customized to work as stand-alone process stations or integrated with existing structures. This IPM offering is suited for plant expansion where spa...
