Webvent

WEF Buyers Guide

Access the most comprehensive, interactive directory of solutions providers for water professionals. Find your next solution on WEF Buyer's Guide - now owned and operated by WEF!

Search Results (51) 

  • Centrisys/CNP
    Centrisys/CNP
    Manufacturer of dewatering centrifuges and sludge thickeners; designs and supplies nutrient recovery and biosolids treatment optimization systems

    CalPrex + AirPrex CalPrex + AirPrex - Capture the Most P-Recovery THE PROBLEM: Phosphorus is a Limited Resource THE SOLUTION: Maximum Phosphorus Recovery, Minimum Sludge Production THE BENEFITS: CalPrex + AirPrex: A Combined Approach • Reduce Phosphate Recycle Load up to 90% • Reduce Polymer Consumption up to 30% • Reduce...
    AirPrex AirPrex - Sludge Optimization and P-Recovery THE PROBLEM: Struvite Mineral Buildup Leads to Reduced Plant Capacity THE SOLUTION: AirPrex Optimizes the Sludge Treatment Process Like No Other System THE BENEFITS: AirPrex Removes Struvite while Significantly Improving Treatment Efficiency • Reduce Polymer C...
    CalPrex CalPrex - Pre-Digestion P-Recovery THE PROBLEM: Phosphorus Solubilization Limits Recovery Efficiency THE SOLUTION: Acid Phase Digestion: the Biological Solution for P Solubilization THE BENEFITS: High Efficiency P-Recovery and Digester Protection • Over 60% Solubilization of P in Bio-P Sludge •...
    PONDUS: Thermo-Chemical Hydrolosys Proce... PONDUS: Thermo-Chemical Hydrolosys Process (TCHP) - PONDUS keeps the hydrolysis process simple and affordable – even for smaller plants! Drastically reducing the overall carbon footprint by minimizing solid waste production, PONDUS enables useful repurposing of biosolids (as fertilizer and carbon source) and methane gas outputs (as renewable en...
    Sülzle Klein Dryer Sülzle Klein Dryer - Low-Temperature Dryer Centrisys/CNP is an exclusive NA distributor for Sülzle Klein dryers. The first U.S. installation of a Compact-Dry was in 2015 at Kenosha, WI. This is a dual belt, low temperature, sludge dryer. The dewatered biosolids are fed at +30% DS and dried to over 90% DS. Since dry...
    Screw Press SP Series Screw Press SP Series - Maintenance is a Breeze With four divided screens, the Centrisys SP20 is simple to operate, maintain and clean. The four screen baskets and horizontal design allow for most maintenance to be completed without removing the screw shaft. There is no need to pull the auger out; simply open the maintenan...
    Dewatering Decanter Centrifuges CS Serie... Dewatering Decanter Centrifuges CS Series - The Right Solution, The Fastest Payback In 1987, Centrisys designed and built its first centrifuge around what was learned in the field by servicing competitor’s equipment in both municipal and industrial applications. Thirty years later, the Centrisys engineering team continues to benefit fro...
    Sludge Thickener THK Series Sludge Thickener THK Series - The Most Efficient Solution to Thicken Sludge The Centrisys Sludge Thickener (THK Series) is specifically engineered to achieve high-performance thickening of biosolids. The non-conical design results in greater G-volume, allowing for the highest capacity of flow to the centrifuge. The THK improves...

  • Lakeside Equipment Corporation
    Lakeside Equipment Corporation
    Cleaner Water for a Brighter Future®

    Raptor® Screening Raptor® Screening - Trusted by municipal and industrial users alike, our Raptor® screening products are designed to effectively screen, wash, compact and dewater captured debris in one smooth, seamless operation. These screening products are all stainless steel construction and designed to combine 4 unit processes...
    Clarification and Filtration Clarification and Filtration - An efficient clarification and filtration system is an essential part of any treatment plant. The peripheral-feed Spiraflo Clarifier is designed for superior removal of settleable solids in water, wastewater and industrial applications. The unique spiral flow pattern has been proven to be more effec...
    Biological Treatment Biological Treatment - Whether your treatment facility is looking to handle varying influent flows or loadings, achieve maximum energy efficiency, or meet stringent discharge limits, Lakeside can provide a cost-effective solution for your biological treatment process. Our team can provide reliable and efficient designs ra...
    Grit Removal Grit Removal - Grit materials such as sand, gravel and other abrasive materials can wear down pumps and valves and also accumulate in channels and tanks. Adding a grit removal system can help maximize aeration and digester tank volumes thereby enhancing treatment plant performance while keeping overall operating c...
    Screens and Trash Rakes Screens and Trash Rakes - Complete line of screens and trash rakes from Muhr, complements Lakeside Equipment’s water and wastewater technology for a complete solution. For new installations or retrofitting of existing structures, these screen and trash rakes effectively clean intake water/wastewater reducing damage to...
    Packaged Headwork's System Packaged Headwork's System - When designing a headwork’s system that needs to be above ground, or a system requiring minimum excavating and concrete work, Lakeside has a solution for you. Our Headwork’s Packaged Systems combine screening and grit removal in a pre-engineered compact design. These systems are provided...
    Hauled Waste Receiving Station Hauled Waste Receiving Station - Receiving waste such as septage, Fats-Oils-Grease (FOG), and sludge can cause severe operational problems and additional equipment maintenance at public and private treatment facilities. Adding a waste receiving station which includes our Raptor® Septage Acceptance Plant or Complete Plant provid...
    Screw Pumps Screw Pumps - Screw Pumps are ideal for moving large volumes of liquid with low lift. Consisting of a few moving parts, Lakeside Screw Pumps provide a built-in variable capacity while operating at a constant speed, resulting in minimum wear and maintenance. With a non-clog design, our Screw Pumps will handle many...

  • KCH Engineered Systems
    KCH Engineered Systems
    We Clean the World's Air and Water

    Biotrickling Systems Biotrickling Systems - KCH designs and manufactures turnkey biotrickling systems that can acheive removal efficiencies greater than 99% on Hydrogen Sulfide. The systems use a non hazardous nutrient instead of potentially dangerous chemicals used in wet scrubbers. The inorganic media used to house the biological microorgan...
    Degasifiers Degasifiers - KCH degasifiers are among the most trusted by the wastewater treatment industy. They are able to strip H2S from millions of gallons of water per day and are also capable of cleansing VOC's, THM, Carbon Dioxide, and other compounds. They are available in our POLYSTRONG™ and POLYLAST™ mate...

  • Jim Myers & Sons, Inc. (JMS)
    Jim Myers & Sons, Inc. (JMS)
    “Making a Difference for Generations” - Water and Wastewater Treatment Equipment

    JMS Mega-BEARING (High Performance Beari... JMS Mega-BEARING (High Performance Bearing System) - The new Mega-BEARING optimizes design and materials of construction to maximize bearing life, and lower maintenance requirements.  Mega-BEARING components are NSF 61 certified, and can extend bearing life by up to 15X. 

  • Anue Water Technologies, Inc.
    Anue Water Technologies, Inc.

    EP-1100 EP-1100 - Eliminates fat, oil and grease (FOG) from municipal wastewater ‘lift stations’. This FOG can build up until it is several feet thick, causing the corrosion and breaking of pipes, along with the subsequent spillage of Ecoli, and danger to environmental and human health in the community. T...
    FORSe 5  Odor and Corrosion System FORSe 5 Odor and Corrosion System - Eliminates odor and corrosion through ozone and oxygen treatment of the force main. Eliminates ongoing cost of chemical treatments for net savings starting within 12 – 24 months. Provides environmentally friendly and sustainable solution versus current chemical alternatives.
    EnviroPrep EP-1100A EnviroPrep EP-1100A - The all new EnviroPrep EP-1100A Series are mechanical, wastewater systems for cleaning and conditioning of wastewater in lift stations, keeping them free of fat, oil, grease (FOG) and biological build-up. The system operates by recycling a fractional amount of pump discharge flow back into the well....

  • Jim Myers & Sons, Inc. (JMS)
    Jim Myers & Sons, Inc. (JMS)
    “Making a Difference for Generations” - Water and Wastewater Treatment Equipment

    Bio-SCREW (Screw Conveyor System) Bio-SCREW (Screw Conveyor System) - JMS is one of the largest and most established suppliers of screw conveyors for municipal applications in N. America. We use our knowledge to provide custom solutions that can save dollars and maximize operational efficiency. Bio-SCREW conveyors are manufactured to accepted CEMA standards. We can de...
    Mega-FLOCS (Paddlewheel Flocculators) Mega-FLOCS (Paddlewheel Flocculators) - JMS Mega-FLOC (Paddlewheel Flocculators) offer a wide range of flexibility with easy installation, and the proven process performance of a paddle wheel design. JMS Mega-FLOCs follow the “Ten States Standards” and are optimized to produce the highest quality floc particles. With hundreds...
    Eco-AIR (Low Profile Cascade Aerator) Eco-AIR (Low Profile Cascade Aerator) - JMS’s ecologically-forward Eco-AIR, has no power consumption or maintenance expense, and JMS unique designs offer a small footprint and optimum flexibility. The new patented Eco-AIR can be installed at new or existing facilities. Compact in design, this device uses patented trapezoidal air inf...
    Mega-SETTLER (Plate Settler Systems) Mega-SETTLER (Plate Settler Systems) - Mega-SETTLER systems suit any basin geometry and sludge collection system. Their use can dramatically reduce the footprint of a conventional sedimentation basin (by 50 to 90%). It can also significantly increase the treatment capacity of existing basins while improving effluent quality. Compared to...

Sponsors

  • Komline-Sanderson

Narrow Your Search