Learn More:
Learn More:
Learn More:
Learn More:
LNMS 3 and 5-wheel liquid tankers, DNMS 3 and 5-wheel spreaders
-
Our 3-wheeled 4103 and 5105, 5-wheeled machines are rugged, durable, high-flotation spreaders with about every imaginable configuration. Both models are all-wheel drive featuring a front wheel with a 70-degree turning radius, and the 5105 has steerable rear axles. Oxbo has three top level choices in...
Digester + Storage Tanks | Distributor for LIPP America Tank Systems
-
Storage for all Major Markets in the Waste + Wastewater Arena
LIPP America Tank Systems can resist the highly abrasive nature of many industry liquids that require special interior lining systems. This unique assembly process and cost effective steel manufacturing allows the LIPP storage tank system...
Adaptive Clarifier Inlet | Distributor for Passavant hydrograv adapt
-
Passavant hydrograv adapt System provides an adaptive inlet flow guiding plates that are adjustable to different submerging depths controlled by a drive station based on the current hydraulic conditions and properties of activated sludge. A proprietary algorithm is built into drive station that sim...
Low-Temperature Belt Dryer DLT Series
-
The Centrisys DLT Series is a dual belt, low-temperature sludge dryer.
Reuse of waste heat reduces plant operating costs and carbon emissions
Increase safety with low-temperature and minimal dust within the dryer
Dried sludge in a granular form with a dryness level of 70-90+%, depending on process...
Dewatering Decanter Centrifuges CS Series
-
The Right Solution, The Fastest Payback
In 1987, Centrisys designed and built its first centrifuge around what was learned in the field by servicing competitor’s equipment in both municipal and industrial applications. Thirty years later, the Centrisys engineering team continues to benefit fro...
Screw Press SP Series
-
Maintenance is a Breeze
With four divided screens, the Centrisys SP20 is simple to operate, maintain and clean. The four screen baskets and horizontal design allow for most maintenance to be completed without removing the screw shaft. There is no need to pull the auger out; simply open the maintenan...
CalPrex
-
Pre-Digestion P-Recovery
THE PROBLEM: Phosphorus Solubilization Limits Recovery Efficiency
THE SOLUTION: Pre-Fermentation: the Biological Solution for P Solubilization
THE BENEFITS: High Efficiency P-Recovery and Digester Protection
Over 60% Solubilization of P in Bio-P Sludge
Divert Over 50%...
AirPrex
-
Post-Digestion P-Recovery
THE PROBLEM: Struvite Mineral Buildup Leads to Reduced Plant Capacity
THE SOLUTION: AirPrex Optimizes the Sludge Treatment Process Like No Other System
THE BENEFITS: AirPrex Removes Struvite while Significantly Improving Treatment Efficiency
Reduce Polymer Consumption up t...
CalPrex + AirPrex
-
Capture the Most Phosphorus
THE PROBLEM: Phosphorus is a Limited Resource
THE SOLUTION: Maximum Phosphorus Recovery, Minimum Sludge Production
THE BENEFITS: CalPrex + AirPrex: A Combined Approach
Reduce Phosphate Recycle Load up to 90%
Reduce Polymer Consumption up to 30%
Reduce Disposal Costs up t...
Sludge Thickener THK Series
-
The Most Efficient Solution to Thicken Sludge
The Centrisys Sludge Thickener (THK Series) is specifically engineered to achieve high-performance thickening of biosolids. The non-conical design results in greater G-volume, allowing for the highest capacity of flow to the centrifuge. The THK improves...
PONDUS Thermo-Chemical Hydrolosys Process (TCHP)
-
SIMPLE | AFFORDABLE | SAFE
PONDUS, an alkaline process, utilizes low grade heat (160 °F to 180 °F) and sodium hydroxide for sludge hydrolysis. A typical PONDUS system consists of a hydrolysis reactor, hot water heat exchanger, chemical dosing station, pumps, instrumen...
SBI Solutions
-
SBI Solutions provides a complete, cost effective Class A or B Solution as a compact, modular system with minimal set up requirements. The proven reliability of a piston pump combined with the patented Bioset process is integrated with efficient screw press dewatering capability to make this a one-s...
Sliding Frame Silos
-
Schwing Bioset, Inc., the leader in storage, conveyance and pumping of municipal biosolids presents our proven line of sliding frame and push floor storage handling systems. Available in circular or rectangular designs, sliding frames and push floors provide a low cost method to store both large and...
Container Wagon
-
Schwing Bioset’s Container Wagon was developed to transfer dumpsters in and out of buildings with low clearances that prevented transport trucks from delivering containers to the needed location. Simply deposit the dumpster onto the Container Wagon and it shuttles the dumpster into position. T...
Fluid Bed Drying Systems
-
Fluid Bed Drying Systems
Schwing Bioset, Inc. offers indirect-heated, thermal drying technology for producing Class A material from dewatered municipal wastewater treatment sludge. Based on the use of a fluidized bed dryer, the approach is to granulate and heat the biosolids within the dryer, and p...
Membrane Bioreactor (MBR)
-
Our new Membrane Bioreactor (MBR) filtration systems for water and wastewater utilize hollow fiber membranes. The unique end-free cartridge design provides an economical alternative to traditional longer fibers. The end-free hollow fiber membranes allow for reduced fouling, greater serviceability, a...
Struvite and Phosphorous Recovery Technology
-
At plants utilizing anaerobic digestion, Struvite commonly forms and creates issues with pipes clogging and equipment being damaged as a result of scaling. Tanks also accumulate Struvite, which require periodic removal and additional expense to plant operations. Schwing Bioset’s nutrient remov...
Municipal Pumps - Material/Biosolid Handling
-
For more than three decades Schwing has addressed all aspects of residual management by pioneering the concept of moving materials through a pipeline. This technology was originally developed and successfully applied to concrete pumping using a twin cylinder, all-hydraulic piston pump. This same bas...
Bioset Process
-
The Bioset process achieves Class A biosolids via the time vs. temperature equation and pH adjustment per the EPA 503 regulations. Temperature is achieved through the addition of quicklime and sulfamic acid and high pH is achieved through the addition of quicklime. Biosolids and chemicals are homoge...
Smartec Sludge Pump System
-
The Smartec line of piston pumps by Schwing Bioset easily convey high-viscosity sludges with high solids content. Ideally suited for sewage sludges and organic waste, Smartec pumps are designed for plant managers seeking to lower their overall expenses and increase overall efficiencies in their plan...
PONDUS: Thermo-Chemical Hydrolosys Process (TCHP)
-
PONDUS keeps the hydrolysis process simple and affordable – even for smaller plants!
Drastically reducing the overall carbon footprint by minimizing solid waste production, PONDUS enables useful repurposing of biosolids (as fertilizer and carbon source) and methane gas outputs (as renewable en...
CalPrex: Pre-Digestion P-Recovery
-
THE PROBLEM
Phosphorus Solubilization Limits Recovery Efficiency
THE SOLUTION
Acid Phase Digestion: the Biological Solution for P Solubilization
THE BENEFITS
High Efficiency P-Recovery and Digester Protection
• Over 60% Solubilization of P in Bio-P Sludge
• Divert Over 50% of the Soluble P...
CalPrex + AirPrex: Capture the Most P-Recovery
-
THE PROBLEM
Phosphorus is a Limited Resource
THE SOLUTION
Maximum Phosphorus Recovery, Minimum Sludge Production
THE BENEFITS
CalPrex + AirPrex: A Combined Approach
• Reduce Phosphate Recycle Load up to 90%
• Reduce Polymer Consumption up to 30%
• Reduce Disposal Costs up to 20%
&bull...
AirPrex: Sludge Optimization and P-Recovery
-
THE PROBLEM
Struvite Mineral Buildup Leads to Reduced Plant Capacity
THE SOLUTION
AirPrex Optimizes the Sludge Treatment Process Like No Other System
THE BENEFITS
AirPrex Removes Struvite while Significantly Improving Treatment Efficiency
• Reduce Polymer Consumption up to 30%
• Reduce Dis...
Biosolids Drying Systems
-
For decades, water management professionals have had the same three options for managing bio-solids. Uzelac Industries is excited to announce a more effective alternative to land application, land filling or incineration – The Uzelac Bio-Solids Management Solution (BMS).
Screw Press
-
The NEW Schwing Bioset Screw Press provides a state-of-the-art solution for wastewater plants and consulting engineers looking to improve their dewatering process. Offering the widest range of model sizes available on the market, the Schwing Bioset Screw Press also comes with a wide range of feature...
